GOPRO LABS · MISSION SERIES

Your settings. One scan.

Start with a preset. Make it yours. Show the QR to your camera.

Settings · Field tested

Camera settings

Capture target

Target resolution

Target frame rate

Preset

Camera model

Capture mode

Resolution / aspect

Frame rate

Color profile

Bit depth

Rates follow camera timing (integer or fractional). Color / bit depth turns HLG off.

White balance

Shutter angle

HyperSmooth

On/AutoBoost: 16:9 through 60 fps in this tool.

Exposure & image controls

Bitrate

Sharpness

ISO control

ISO maximum

Auto range sets the ceiling; the camera manages the minimum. Fixed ISO makes minimum and maximum equal. Independent minimum ISO is not supported here.

Noise reduction

EV compensation

Leave unchanged when using a manual shutter and an explicit ISO setting.

Remember settings on this device

Reset restores Cinema at your target and clears saved settings. It does not reset a camera.

Scan settings

QR OFF

Select a preset and generate a QR.

Ready to configure

Review your settings, then generate the QR.

Scan while idle. Confirmation appears on the camera.

Edit settings

GoPro Labs command

Generate a QR to see the command.

Check applied settings before recording. Timecode QR is field tested on stock MISSION 1 firmware; Camera Settings QR is field tested with updated firmware and requires Labs.

Supported settings & limitations ↗